Thermo Electric Safety Control

Full sequential Ignition (no standing pilot required)
CE approved for Europe as a control
Battery operated (3 x AA size alkaline)
Extremely low power consumption for long battery life
Flame rectification sensing
Thermocouple sensing
Ignition via pilot or direct to burner
Connections:
Inlet and outlet M12 Male compression for 8mm pipe
Pilot (if required) M10 male Compression for 4 mm pipe
Thermocouple via 6.3 mm faston terminals
Radio frequency controlled transceiver system.
Infrared eye option for open burner appliances (if required).
TESC – Remote control valve for Gas heating appliances
Option of full function or simple hand set
Programmable to allow one control to be used on all models in your range of appliances
Off switch to preserve battery power when not in use for long periods (summer)
Alternative power source options
Auxiliary contacts for switching lighting and/or power flue
Ambient temperature -20 to +70 C (higher temperature limited by type of batteries used. Can be higher if remote battery source is used.* ask for details
Wired remote switches are an option
Paging wireless remote feature
Up to 15 kW burner power capacity
Millions of channels making unintended operation of adjacent appliances extremely unlikely
One compact unit does all, no separate electronic modules or battery compartments etc.
Will run from USB phone charger
Manual controls on base unit
Thermostatic control (selectable option) at no extra cost
Timed operation (optional)
Sleep function (optional)
Appliance service assistance (optional)
Solid state switching of thermocouple current
Soft start feature
Short start sequence only 1 to 2 seconds from initiation to full burner power
Share this post...Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn