Filter Fans

Filter Fan units designed for retro-fit installation in electrical cabinets and enclosures where excessive heat develops, due to the high density of equipment, and overheating threatens to damage the components inside.
Filter Fan units, with separate outlet, filter force cooled air from the outside into the cabinet and remove warm air from the inside. By reducing the temperature inside the cabinet sensitive electronic components are protected from overheating.
The FF series is available in different sizes for various cooling needs.

 

Features
Mounting without screws in square openings for plate thickness between 1.5mm and 3mm
Standard colour Light Grey (RAL 7035)
Storage temperature: – 45°C to +75°C
Permanent sealing gasket in polyurethane foam
Filter media: Filter class G3 according to EN 779, G4 on request, UL900 Class 2 approved and self-extinguishing in F1 Class according to DIN 53438
Shielded and self-lubricating ball bearing fans
Standard Ingress Protection IP54 according to EN 60529, IP55 on request
EMC version available on request
UL approval according to UL508 and UL507 (pending)
Specifications
Panel cut-out: 126 x 126mm to 292 x 292mm
External dimensions: 150mm2 x 7.7mm to 325mm2 x 9.5mm
Airflow (free-air): 26.5cfm to 389cfm
Supply voltage: 115/230VAC & 24VDC. Special Voltages (48 VDC, 400 V 3~…) on request

Share this post...Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn