EC Axial Fans

Hidria manufacture high performance AC and EC (electronic commutation) axial fans with external rotors, distinguished by their low noise and high energy efficiency. The latter far exceed limit values laid down for energy efficiency by the European energy efficiency directive, ErP 2015. The continual introduction of innovative design solutions and new production technologies assures the high quality of their products. As an innovative manufacturer, in 2014, Hidria successfully developed a new generation of EC axial fans (HEC), combining high level design with advanced fan operating functionality, culminating in their product design solution being awarded the Red Dot award for Product Design 2014.
EC Axial Fans offer high efficiency throughout the entire speed range. Speed setting is available via analogue input 0-10v, 4-20mA and PWM Signal, or digital input via MODBUS RTU. All adjustments can be made with software or factory pre-set. Customisation to the required specification is possible; e.g. fan colour, lead wire length, provision of grill or wall plate, etc. All Hidria EC motor fans are ErP 2015 compliant.

Ø300mm
Stamped Metal Blades
Single Phase
Nominal Voltage Range: 230VAC, 50/60Hz
Input Power: 80W
Speed: 1650 RPM
Protection Class: IP44
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø315mm
Stamped Metal Blades
Single Phase
Nominal Voltage Range: 230VAC, 50/60Hz
Input Power: 120W
Speed: 1650 RPM
Protection Class: IP44
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø330mm
Stamped Metal Blades
Single Phase
Nominal Voltage Range: 230VAC, 50/60Hz
Input Power: 120W
Speed: 1550 RPM
Protection Class: IP44
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø350mm
Stamped Metal Blades
Single Phase
Nominal Voltage Range: 230VAC, 50/60Hz
Input Power: 125W
Speed: 1400 RPM
Protection Class: IP44
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø400mm
Composite PA30GF Blades
Single Phase
Nominal Voltage Range: 200~240VAC, 50/60Hz
Input Power: 320W
Speed: 1520 RPM
Protection Class: IP54
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø450mm
Composite PA30GF Blades
Single Phase
Nominal Voltage Range: 230VAC & 230-240VAC, 50/60Hz
Input Power: 220 & 300W
Speed: 1150 & 1280 RPM
Protection Class: IP44
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø500mm
Composite PA30GF Blades
Single Phase
Nominal Voltage Range: 230~240VAC, 50/60Hz
Input Power: 120 & 300W
Speed: 800 & 1100 RPM
Protection Class: IP54
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø500mm
Composite PP40GF Blades
Single & 3 Phase
Nominal Voltage Range: 200~277VAC & 380-480VAC, 50/60Hz
Input Power: 650 & 980W
Speed: 1420 & 1600RPM
Protection Class: IP54
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø560mm
Composite PA30GF Blades
Single Phase
Nominal Voltage Range: 200~240VAC, 50/60Hz
Input Power: 240W
Speed: 950 RPM
Protection Class: IP54
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø560mm
Composite PP40GF Blades
Single Phase
Nominal Voltage Range: 200~277VAC & 380-480VAC, 50/60Hz
Input Power: 600W
Speed: 1150 RPM
Protection Class: IP54
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø630mm
Composite PA30GF Blades
Single Phase
Nominal Voltage Range: 230~240VAC, 50/60Hz
Input Power: 250W
Speed: 770 RPM
Protection Class: IP54
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø630mm
Composite PP40GF Blades
Single & 3 Phase
Nominal Voltage Range: 200~277VAC & 380-480VAC, 50/60Hz
Input Power: 620 & 900W
Speed: 980 & 1100 RPM
Protection Class: IP54
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø710mm
Composite PP40GF Blades
Single & 3 Phase
Nominal Voltage Range: 200~277VAC & 380-480VAC, 50/60Hz
Input Power: 670 & 930W
Speed: 820 & 900RPM
Protection Class: IP54
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Ø800mm
Composite PP40GF Blades
Single & 3 Phase
Nominal Voltage Range: 200~277VAC & 380-480VAC, 50/60Hz
Input Power: 720 & 810W
Speed: 710 & 735RPM
Protection Class: IP54
Direction of airflow: Sucking or blowing
Working ambient temperature between -25°C and +65°C
Insulation Class: 130
Share this post...Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn